Loop-U 3800 E1 HDSL - NTU

(OLD NAME: Loop-H 800)

FEATURES

Up to 4.5 Km distance over 2 pairs of 24AWG (.5mm) unconditioned wires (see chart).

E1 Transmission standards.
 
 
 
 


 
 

APPLICATION

The system operates over 2 pairs of wires (4-wire) with a total data rate of 2048 Kbps. The Loop-U 3800 E1 HDSL must operate in pairs, with the Network Termination Unit (NTU) located at customer premises working with the Line Termination Unit (LTU) located in the central office. Although equipped with console port for performance and testing, all control and maintenance is done from the central office unit via either the LCD panel or a terminal.

The major advantage of Loop-U 3800 HDSL is the elimination of loop repeaters and copper conditioning requirements, so long as the cables meet CSA (carrier service area) guidelines.

Description
 
Product Series Interfaces Description
Loop-U 3800 E1 HDSL NTU (Remote stand-alone unit at customer premises used for network termination) E1

HDSL 4-wire facility

RS232

NTU functionality

Self test

Console port for performance & test

Link status, E1 & HDSL loopbacks

Communicates with LTU

AC powered

Loop-U 3800 E1 HDSL LTU (Plug-in card at Central Office used for line termination See corresponding data sheet.) E1

HDSL 4-wire facility

RS485

LTU Functionality

Bantam jacks for test access

Sealing current & status indication

Link status, E1 & HDSL loopbacks

Communicates with NTU & HCOT

Individually -48Vdc powered

Loop-U 3800 E1 HDSL HCOT (Plug-in Common Controller See LTU data sheet.) RS485

RS232

Reserved connector for future Ethernet

Console port

Communicates with LTU via RS485

Configure and self test

Monitor all status and performance

Report alarms

Stores alarms and performance data -48Vdc powered

Rack Cage (See LTU data sheet.) None Mechanical support and backplane wiring for up to 16 LTU, and a HCOT Backplane distributes RS485 signal, -48Vdc

Product Specifications
 
E1 Interfaces HDB3, Unframed or G.704 frame with CRC4  
HDSL Line Interfaces Duplex with echo cancellation 2B1Q

Unconditioned 19-26 AWG twisted pair

 
Clock HDSL looped  
Diagnostic Tests E1 loopback, HDSL line loopback  
Front Panel 5 status LEDs (Power, Line, Loop1, Loop2, Alarm)  
Physical NTU - standalone desk unit , 216x50x285mm  
Electrical NTU - 90-260 Vac  
Environmental Temperature 0 C to 50C

Humidity - 0 %to 90% non-condensing

Vibration - FCC 68.302

Electromagnetic Compatibility - DGT 2107 section 7.4

FCC Part 15, Part 68 sub C, sub D

UL 1459

Compliance ETSI
Distance Chart
Maximum is for no noise

Minimum is with 0dB ETSI noise

Wire Gauge
Wire Diameter
Maximum Distance
Minimum Distance
26
0.4 mm
3.8 Km
2.7 Km
24
0.5 mm
4.8 Km
3.4 Km
22
0.6 mm
6.0 Km
4.3 Km
19
0.9 mm
8.5 Km
6.1 Km

 
 
LOOP TELECOMMUNICATION INTERNATIONAL, INC.
Worldwide
2F, No. 22, Prosperity Road, 2 Science-Based Industrial Park, Hsinchu, Taiwan. 

Tel: +886-3-578-7696 Fax: +886-3-578-7695 e-mail: sales@loop.com.tw

Taipei, Taiwan Tianjin China North America North America
Rm. E, 8F-3, No. 71 4th Floor, Keyuan Science &  Multi-Media Comm. Inc. PO Box 85
Sec. 2, Jen-Ai Road Trade Building 16021 Comprint Ciecle 6 West Cove Road
Taipei, Taiwan No. 240 Baidi Road Gaithersburg, MD 20877 Sterling Forest, NY 10979 U.S.A.
Tel: +886-2-394-9877 Nankai District, Tianjin, China Tel: 1-301-977-9008 Tel & Fax: +1-914-477-3368
Fax: +886-2-394-9943 Tel: +86-22-2369-4753 Fax: 1-301-977-0776 Cell: +1-914-393-5131
  Fax: +86-22-2369-6344 E-Mail: Postmaster@mmci.net Toll-Free: 800-380-5667

gcmcd@warwick.net

ã 1997 Loop Telecommunication International, Inc. · All Rights Reserved c1